Audi Q3: Maintenance and Care
Audi Q3 (F3) 2018-2025 Owner's Manual / Maintenance and Care
- Checking and Filling
- Fuel
- Refueling
- Emissions control system
- Engine compartment
- Opening and closing the hood
- Engine oil
- Checking the engine oil level
- Adding engine oil
- Changing engine oil
- Cooling system
- Checking coolant
- Brake fluid
- Electrical system
- Battery
- Safety precautions
- Charging the 12 volt vehicle battery
- Windshield washer system
- Service interval display
- Wheels
- Wheels and Tires
- Glossary of tire and loading terminology
- New tires or wheels
- Tire wear and damage
- Tire pressure
- Tires and vehicle load limits
- Wheel bolts and rims
- Snow chains
- Uniform tire quality grading
- Tire pressure monitoring system
- Care and cleaning
READ NEXT:
Fuel
Types of gasoline
The correct gasoline grade is stated on the inside
of the fuel filler door.
The vehicle is equipped with a catalytic converter
and must only be driven with unleaded gasoline.
Audi r
Refueling
Messages
The following messages may appear depending
on the vehicle equipment:
Messages
If the indicator light appears
with a corresponding
message, refuel the vehicle.
Tank system: malfunction!
P
SEE MORE:
Component Location Overview - Components Inside Front Passenger
Compartment
Component Location Overview - Components Inside Front Passenger
Compartment, Left Side of Passenger Compartment
1 - Left Footwell Vent
Overview. Refer to
→ Chapter "Overview - Air Routing and Air Distribution in Passenger
Compartment, Front Air Guides".
2 -
Vacuum Sensor -G608-, Removing and Installing
Removing
Audi Q3:
- Open the clamps -arrows- and
remove the air guide pipe -1-.
- Disconnect the connector -2-.
- Remove the vacuum hose -3-.
Audi RS Q3:
- Loosen the hose clamps -arrows-
and move the air guide pipe with the hose connected to the side.
- Dis
© 2019-2025 Copyright www.auq3.net
