Audi Q3: Assist systems
Assist systems
- General information
- Surrounding area detection
- Driving information
- Driver assistance
- Cruise control system
- Adaptive cruise assist
- Limitations
- Display overview
- Using adaptive cruise assist
- Switching lane guidance on and off
- Predictive control
- Setting the distance
- Overriding control
- Driver intervention request
- Distance warning
- Lane departure warning
- Audi pre sense
- Audi pre sense basic
- Adjusting Audi pre sense
- Side assist
- Adjusting side assist
- Emergency assist
- Parking and maneuvering
READ NEXT:
General information
Safety precautions
WARNING
As the driver, you are always completely responsible
for all driving tasks. The assist
systems cannot replace the driver's attention.
Give your full attention to drivin
Surrounding area detection
Sensor and camera coverage areas
Fig. 88 Sensor coverage area
Fig. 89 Rearview camera coverage area
The assist systems analyze the data from various
sensors and cameras installed in the vehicle. Do
SEE MORE:
Tread Depth, Measuring
Tread Depth, Measuring
Note
When measuring tread depth, take measurements in the main
grooves.
Do not measure on the TWI (tread wear indicator).
Tread depth of a tire must be measured in the main grooves
at the points showing the most wear. Main tread grooves can be
recogniz
Tires with Emergency Running Characteristics, Seal Inside-Technology
Caution
It is mandatory for run-flat tires to have a tire
pressure monitoring system in the vehicle.
Examining and replacing the seal inside tires should
only be performed by trained personnel.
Note
The seal inside technology makes it possible to continue
driving with
© 2019-2026 Copyright www.auq3.net | 0.013
