Audi Q3: Driver assistance
Audi Q3 (F3) 2018-2026 Owner's Manual / Driver assistance
- Cruise control system
- Adaptive cruise assist
- Limitations
- Display overview
- Using adaptive cruise assist
- Switching lane guidance on and off
- Predictive control
- Setting the distance
- Overriding control
- Driver intervention request
- Distance warning
- Lane departure warning
- Audi pre sense
- Audi pre sense basic
- Adjusting Audi pre sense
- Side assist
- Adjusting side assist
- Emergency assist
READ NEXT:
Cruise control system
Description
Applies to: vehicles with cruise control system
The cruise control system assists the driver in
maintaining a constant speed above approximately
15 mph (20 km/h). The system maintains
the
Adaptive cruise assist
General information
Applies to: vehicles with adaptive cruise assist
Depending on the vehicle equipment, the adaptive
cruise assist may consist of the following
functions:
Within the limits of the sys
Limitations
Applies to: vehicles with adaptive cruise assist
Fig. 95 Example: vehicle changing lanes and stationary vehicle
Fig. 96 Example: driving into a curve
In some situations, the adaptive cruise assist
fSEE MORE:
Trim Molding, Removing and Installing
Special tools and workshop equipment
required
Wedge Set -T10383-
Removing
Note
Do not twist or bend the side window trim molding.
- Removing the roof trim molding. Refer to
→ Chapter "Roof Trim Molding, Removing and Installing".
- Tape off the area around the
Wheel Bearing Housing, Removing and Installing
Special tools and workshop equipment
required
Puller - Ball Joint -3287A-
Torque Wrench 1332 40-200Nm -VAG1332-
Engine and Gearbox Jack -VAS6931-
Digital Torque Wrench -VAG1756A-
Spreader Tool -3424-
Removing
- Loosen the drive axle threaded connection on the wheel side.
Ref
© 2019-2026 Copyright www.auq3.net | 0.0183
