Audi Q3: Adaptive cruise assist
General information
Applies to: vehicles with adaptive cruise assist
Depending on the vehicle equipment, the adaptive cruise assist may consist of the following functions: Within the limits of the system, the adaptive speed assist assists the driver in controlling the speed and the set distance to the vehicle driving ahead. If the system detects a vehicle driving ahead, the adaptive speed assist can brake and accelerate your vehicle within the limits of the system. On open roads with no traffic, it functions like a cruise control system. The stored speed is maintained. When approaching a vehicle driving ahead, the adaptive speed assist automatically brakes to match that vehicle's speed and then maintains the set distance as much as possible. Once the system does not detect a vehicle driving ahead, adaptive speed assist will accelerate up to the set speed.
The additional lane guidance assists the driver with corrective steering in order to stay in the lane. You can adjust if the adaptive cruise assist will provide support with lane guidance.
In stop-and-go traffic and in traffic jams, the vehicle may brake to a full stop and then may also start driving again automatically under certain conditions.
Applies to: vehicles with predictive control: Predictive control can adjust the speed based on traffic and road conditions.
WARNING
Observe the safety precautions and note the limits of the assist systems, sensors, and cameras.
Tips
The system complies with United States FCC regulations and ISED regulations.
READ NEXT:
Limitations
Applies to: vehicles with adaptive cruise assist
Fig. 95 Example: vehicle changing lanes and stationary vehicle
Fig. 96 Example: driving into a curve
In some situations, the adaptive cruise assist
f
Display overview
Applies to: vehicles with adaptive cruise assist
Fig. 97 Instrument cluster: display in speedometer
Fig. 98 Instrument cluster: driver assistance display
Indicator lights and messages in the speedom
Using adaptive cruise assist
Applies to: vehicles with adaptive cruise assist
Fig. 99 Lever: using adaptive cruise
assist
Fig. 100 Operating lever: changing the speed
Switching on
To switch on the adaptive cruise assist, pulSEE MORE:
Rearview camera and peripheral cameras
Introduction
Applies to: vehicles with rearview camera/peripheral cameras
Fig. 113 Orientation line display when parking
Depending on the vehicle equipment, a rearview
camera or multiple peripheral cameras may be
available.
The rearview camera helps you to park or maneuver
using the orientation li
Subframe, Removing and Installing
Subframe, Removing and installing, FWD Vehicles
Special tools and workshop equipment
required
Locating Pins -T10096-
Torque Wrench 1332 40-200Nm -VAG1332-
Engine and Gearbox Jack -VAS6931-
Removing the Subframe and Attachments
- Disconnect the right and left electromechanical par