Audi Q3: Interior Trim
- Overview - Front Door Trim Panel
- Midrange Speaker Trim, Removing and Installing
- Front Door Trim Panel, Removing and Installing
- Front Pull Handle, Removing and Installing
- Overview - Rear Door Trim Panel
- Interior Door Mechanism, Removing and Installing
- Component Location Overview - Instrument Panel
- Instrument Panel Side Cover, Removing and Installing
- Instrument Panel, Removing and Installing
- Instrument Panel Vent, Removing and Installing
- Instrument Panel Central Tube
- Component Location Overview - Passenger Compartment Trim
- Overview - A-Pillar Trim Panel
- Sill Panel Strip, Removing and Installing
- A-Pillar Trim Panel, Removing and Installing
- Foot Rest, Removing and Installing
- Component Location Overview - Luggage Compartment Trim Panels
- Lower Rear Lid Trim Panel, Removing and Installing
- Luggage Compartment Side Trim Panel, Removing and Installing
- Rear Luggage Compartment Floor Handle, Removing and Installing
- Roof Trim Panels
READ NEXT:
1 - Pull Handle
With switch mount
Removing and installing. Refer to
→ Chapter "Front Pull Handle, Removing and Installing".
2 - Left Front Entry Lamp -W31-
Special tools and workshop equipment
required
Wedge Set -T10383-
Removing
- Pry out the speaker trim -1-
along the door trim seam -arrow-
using the Wedge -T10383/1- and remove it.
Special tools and workshop equipment
required
Wedge Set -T10383-
Removing
- Switch the ignition off and remove the ignition key.
- Remove the trim panel. Refer to
→ Chapt
SEE MORE:
Removing
- To remove the expanding clips -arrows-,
push the clamping pin -1- carefully
to dimension -x- until it clicks
into the expanding clip -arrow A-.
Dimension -x- = 5 mm
- Pull out unlocked expanding clip -2-
with the clamping pin.
- Remove the lock carrier cove
Example: Dunlop SP Sport 9000
1 - Size Designation (215/55 ZR16)
Label on PAX tires. Refer to
→ Chapter "Run-Flat Tire (PAX), Labeling On Sidewall"
2 - Manufacturer (Trade Name)
3 - Tread Designation
4 - Label for Tubeless Tires
5 -&