Audi Q3 Owners & Service Manuals

Audi Q3: Destination details

Infotainment system / Audi Q3 (F3) 2018-2026 Owner's Manual / Destination details

Applies to: vehicles with navigation system

Navigation
Fig. 130 Details

After you have selected a destination, the details will be displayed. Route guidance is will not be active yet.

The functions depend on the vehicle equipment and the selected destination.

  1. Map preview: to zoom in on the map preview, press on the map.
  2. Route criteria.
  3. More: additional functions.
  4. Weather: Requirement: the MMI must be connected to the Internet.
  5. Call: Requirement: a mobile device must be connected to the MMI. You will make a call to the phone number that is stored for the destination.
  6. Start: starts navigation to the displayed destination.

    The map will be displayed.

  7. Parking: press Parking to search for a parking space at the destination. You can use the parking space as a destination or stopover.

    Details: Requirement: the MMI must be connected to the Internet.

  8. Display of distance/driving time to the destination
  9. Weather at the destination: Requirement: the MMI must be connected to the Internet.

Selecting a destination from the map

Applies to: vehicles with navigation system

A point on the map can be used as the destination.

Opening the map

  • Applies to: MMI: Press NAVIGATION on the home screen.
  • If necessary, press A to display the map.

Adjusting the scale

  • Select: > select a scale.

Marking the destination

  • Press and hold a point on the map until a marking appears or the address for the selected destination is shown.

Selecting map content (such as POIs) as the destination

Requirement: map content must be displayed.

  • Press on map content on the map (for example, ).

Selecting the destination

  • Select: > Start.

READ NEXT:

  Stopovers and route plan

Applies to: vehicles with navigation system You can enter additional destinations during active route guidance. Entering a stopover Requirement: route guidance must be active. Enter a destination.

  Map

Map function Applies to: vehicles with navigation system Fig. 131 Active route quidance Fig. 132 Marked map object Opening the map Applies to: MMI: Press NAVIGATION on the home screen. If neces

  Predictive route guidance

Applies to: vehicles with navigation system and predictive route guidance Your MMI can learn the routes that you drive frequently (such as your daily commute to work and back) and suggest route guidan

SEE MORE:

  Exterior lighting

Switching the lights on and off Fig. 37 Instrument panel: light button module Light switch Press and hold 1 until the desired light function is selected. The selected function is displayed briefly in the instrument cluster. When switching on the ignition, the AUTO light function is automaticall

  Windshield wipers

Switching the windshield wipers on Fig. 44 Lever: windshield wipers Fig. 45 Lever: rear window wiper Move the lever to the corresponding position: 0 - Windshield wipers off 1 - Rain sensor/intermittent mode. The windshield wipers switch on once the vehicle speed exceeds approximately 2 mph (4 km

© 2019-2026 Copyright www.auq3.net | 0.0143