Audi Q3: Stopovers and route plan
Infotainment system / Audi Q3 (F3) 2018-2026 Owner's Manual / Stopovers and route plan
Applies to: vehicles with navigation system
You can enter additional destinations during active route guidance.
Entering a stopover
Requirement: route guidance must be active.
- Enter a destination.
Displaying stopovers or the route plan
All destinations are listed in the route plan.
- Press on
.png)
in the side menu
on the map
.png)
fig. 131.
Editing stopovers
- Press on Fin the side menu on the map
.png)
fig. 131. - Adding a stopover: Select: Add destination select a destination > Add to route.
- Moving a stopover: press
.png)
.
Touch the .png)
symbol
and move the entry to the desired position.Press Done.
- Deleting a stopover: Select:
.png)
> one or more
entries or Select all > Delete > (Done).
Stopping route guidance
Applies to: vehicles with navigation system
Requirement: route guidance must be active and the map must be displayed.
- Applies to: MMI: Press
.png)
.png)
fig. 131. - Select in the instrument cluster: Navigation tab
>
.png)
button > Cancel route
guidance.
READ NEXT:
Map
Map function
Applies to: vehicles with navigation system
Fig. 131 Active route quidance
Fig. 132 Marked map object
Opening the map
Applies to: MMI: Press NAVIGATION on the
home screen.
If neces
Predictive route guidance
Applies to: vehicles with navigation system and predictive
route guidance
Your MMI can learn the routes that you drive frequently
(such as your daily commute to work and
back) and suggest route guidan
Alternative routes
Applies to: vehicles with navigation system
Fig. 134 Alternative routes in the overview map
Opening alternative routes
Requirement: route guidance must be started
and the map must be displayed.
PreSEE MORE:
Operating in the cockpit
Fig. 78 Deluxe automatic climate control with 2 zones/3 zones: controls
Observe the safety precautions.
The functions can be switched on and off by
pressing the buttons or adjusted by turning the
knob. When the function is switched on, the LED
in the respective button or knob turns on.
Cooling mod
Drive Axle, Disassembling and Assembling
Drive Axle, Disassembling and Assembling, Drive Axle with 100 mm Inner CV
Joint
Special tools and workshop equipment
required
Tripod Joint Tool -T10065-
Torque Wrench 1331 5-50Nm -VAG1331-
Torque Wrench 1332 40-200Nm -VAG1332-
Clamping Pliers -VAG1682A-
Circlip Pliers -VW161A-
Pre
© 2019-2026 Copyright www.auq3.net | 0.0106
