Audi Q3: Suspension, Wheels, Steering
Audi Q3 (8U) 2011-2018 Service Manual / Suspension, Wheels, Steering
- General, Technical data
- Front Suspension
- Rear Suspension
- Self-Leveling Suspension
- Wheels, Tires, Wheel Alignment
- Steering
READ NEXT:
General Information
Suspension
1: Front/rear track width, applies only to
215/65/R16 standard tires on 6.5Jx16 ET33 rims.
Steering
Tire Types
General information on wheel/tire combinations, winter tires, snow c
Repair Information
Shock Absorber Leaks
Shock absorbers are frequently rejected and exchanged
because of leaks. Examinations on the test stand and on the
vehicle have shown that the replacement of a large number ofSEE MORE:
Overview - Subframe
Caution
There is a risk of damaging the subframe threaded
connection threads on the body.
The subframe bolts on the body must not be loosened
or tightened with an impact wrench.
Always install all bolts by hand for the first few
turns.
1 - Subframe
Securing.
Drive Axle Threaded Connection, Loosening and Tightening
Special tools and workshop equipment
required
Socket AF 24 mm -T10361A-
Digital Torque Wrench -VAG1756A-
The wheel bearing must not be under a load while the drive
axle threaded connection on the wheel side is loose.
If the bearings are loaded by the vehicle weight the wheel
bearing
© 2019-2026 Copyright www.auq3.net | 0.0101
