Audi Q3: Self-Leveling Suspension
Chassis / Audi Q3 (8U) 2011-2018 Service Manual / Self-Leveling Suspension
READ NEXT:
Electronic Damping
Overview - Electronic Damping Component Location
Note
The body acceleration sensors may not be interchanged with
each other.
1 - Right Front Body Acceleration Sensor -G342-
Level Control System Sensor
Overview - Front Level Control System Sensor
Note
A replacement Left Front Level Control System Sensor -G78- and Right
Front Level Control Sensor -G289- only comes complete with the couplSEE MORE:
Drive Axle Threaded Connection, Loosening and Tightening
Special tools and workshop equipment
required
Socket AF 24 mm -T10361A-
Digital Torque Wrench -VAG1756A-
The wheel bearing must not be under a load while the
driveshaft threaded connection on the wheel side is loose.
If the bearings are loaded by the vehicle weight the wheel
bearing
Speaker Ambient Lighting Bulb 1 and 2 -L211-/-L212-, Removing and Installing
Speaker Ambient Lighting Bulb 1 -L211-, Removing and Installing, Front
Door
Removing
- Remove the front door trim panel. Refer to
→ Body Interior; Rep. Gr.70; Front Door Trim Panels; Front Door
Trim Panel, Removing and Installing.
- Disconnect the connector -4-.
-
© 2019-2026 Copyright www.auq3.net | 0.017
