Audi Q3: Lights and Vision
Audi Q3 (F3) 2018-2026 Owner's Manual / Lights and Vision
- Exterior lighting
- Turn signal and high beam lever
- High beam assistant
- Adjusting the exterior lighting
- Interior lighting
- Vision
- Dimming the mirrors
- Windshield wipers
- Cleaning/changing wiper blades
- Cleaning/changing the rear wiper blade
- Digital compass
READ NEXT:
Exterior lighting
Switching the lights on and off
Fig. 37 Instrument panel: light button module
Light switch
Press and hold 1 until the desired light function
is selected. The selected function is displayed
briefl
Turn signal and high beam lever
Fig. 38 Operating lever: switching the light functions on
and off
The lever operates the turn signals, the high
beams and the headlight flasher.
Turn signals
The turn signal will activate when you m
High beam assistant
Applies to: vehicles with high beam assistant
The high beam assistant automatically turns the
high beams on or off depending on the surrounding
conditions.
A camera on the rearview mirror mount can dSEE MORE:
Wheel and Tire Guide
Audi Q3, Type 8U
This is the Wheel and Tire Guide for the Following Model:
"Audi Q3 / RS Q3".
Play Close Attention to the corresponding Notes and Cautions As Well As the
Comments in the Document.
Note
Inner diameter 57 mm, hole circle 112 mm, 5 wheel bolts,
tightening specification
Lane Change Assistance, Calibrating
Special tools and workshop equipment
required
Calibration Tool -VAS6350-
Conditions
- The Lane Change Assistance Control Module -J769-/ Lane
Change Assistance Control Module 2 -J770- must be calibrated
using the Vehicle Diagnostic Tester during the following
conditions:
Lane
© 2019-2026 Copyright www.auq3.net | 0.011
