Audi Q3: Entering a destination
Intelligent search for navigation destinations
Applies to: vehicles with navigation system
Using the intelligent search, you can enter the
data for a navigation destination in any order all
at once (for example, 5th Avenue New York).
Likewise, you can search for points of interest,
contacts, previous destinations, or favorites in order
to navigate to the desired destination.
Opening a menu
- Applies to: MMI: Select on the home screen:
NAVIGATION > .
Intelligent search
- Enter one or more search terms into the input
field.
- Press on the desired destination in the results
list. The Details menu will be displayed.
- Press Start. Route guidance will be activated
and the map will be displayed
fig. 131.
Online Points of Interest
- Searching for points of interest: enter the
name of a POI.
- Select: a symbol for a POI category (such as
) > a POI, or
- To display all categories and search for a POI,
select: > a category (such as
restaurants) > a POl.
Change search area
Requirement: route guidance must be active.
Applies to: MMI: Select on the home screen:
NAVIGATION > .
To change the search area, press
/ /
repeatedly
until the desired search area is selected.
Online search
Applies to: vehicles with navigation system and online search
You can use the results from a search engine provider
to find a navigation destination.
Requirement: the MMI must be connected to the
Internet.
- Applies to: MMI: Select on the home screen:
NAVIGATION > >
.
- Enter one or more search terms into the input
field.
- The search engine provider shows suggestions
to narrow down the search.
- Press on suggestions, if available, until the desired
destination appears in the results list. If
necessary, use one finger to swipe upward or
downward until the suggestions
or destinations appear.
- Press on the desired destination . The Details
menu will be displayed.
- Press Start.
Tips
- The MMI input suggestions depend on the
last navigated destinations.
- The navigation system always searches for
the fastest route. You can have alternative
routes displayed if necessary.
- If the destination cannot be found, it may
not be stored in the navigation database.
- Check the spelling of the term that was
searched or check the search area.
- Distances to points of interest are displayed
as a straight-line distance from your current
location. The actual distance from your current
location to the point of interest is updated
automatically. The list of points of interest
that were found is not resorted when
this happens.
READ NEXT:
Applies to: vehicles with navigation system
Fig. 129 Menu: select destination
Opening a menu
Applies to: MMI: Press NAVIGATION on the
home screen.
If the map is displayed, press
fig. 128.
T
Applies to: vehicles with navigation system
Fig. 130 Details
After you have selected a destination, the details
will be displayed. Route guidance is will not be
active yet.
The functions depend on t
Applies to: vehicles with navigation system
You can enter additional destinations during active
route guidance.
Entering a stopover
Requirement: route guidance must be active.
Enter a destination.
SEE MORE:
Brake Rotor, Removing and Installing, Brake 1KU
Removing
- Remove the brake caliper with brake carrier, refer to
→ Chapter "Brake Caliper, Removing and Installing, Brake 1KU".
- Remove bolt -3- and remove the
brake rotor.
Installing
Install in reverse order of removal. Not
Applies to: vehicles with navigation system
Fig. 129 Menu: select destination
Opening a menu
Applies to: MMI: Press NAVIGATION on the
home screen.
If the map is displayed, press
fig. 128.
The following functions are available:
Last destinations
Favorites
Contacts
Received destination