Audi Q3: Audi connect Infotainment
Description
Applies to: vehicles with Audi connect Infotainment
With Audi connect Infotainment services, online
information is transmitted directly to the vehicle.
An Internet connection is required to use Audi
connect Infotainment. The Internet connection is
established using the embedded SIM card (eSIM).
WARNING
Always follow the information found in General information.
Note
Always follow the information found in General information.
Embedded SIM card
Applies to: vehicles with Audi connect Infotainment and an
embedded SIM card
The data connection for Audi connect Infotainment
services is made through an embedded SIM
card (eSIM card) that is installed in the vehicle.
You can use the Audi connect Infotainment services
immediately.
Note
Always follow the information found in General information.
Using a Wi-Fi hotspot
Applies to: vehicles with Wi-Fi hotspot
You can connect up to eight Wi-Fi devices (such
as smartphones) with the MMI Wi-Fi hotspot. If
the MMI is connected to the Internet,
the connected Wi-Fi devices can also use the
MMI's Internet connection.
Requirement: the ignition must be switched on.
A data plan must be available.
- Applies to: MMI: Select on the home screen:
SETTINGS > Connection settings > Wi-Fi
Switch on the Wi-Fi hotspot.
- Applies to: MMI: Select on the home scree!
SETTINGS > Connection settings > Wi-Fi > Wi-Fi hotspot settings. The access
data for the Wi-Fi hotspot is displayed.
- Switch the Wi-Fi function on in your mobile device
and connect it to the MMI Wi-Fi hotspot using
the authentication data that is shown.
- Follow any additional system prompts on your
Wi-Fi device if necessary.
Your device is successfully connected with the
MMI's Wi-Fi hotspot.
WARNING
Always follow the information found in General information.
Note
Always follow the information found in General information.
Tips
The system complies with United States FCC
regulations and ISED regulations.
READ NEXT:
Configuration
Applies to: vehicles with Audi connect Infotainment
Some Audi connect Infotainment services must
be configured through your personal myAudi account
at my.audi.com before using them for
Services
Applies to: vehicles with Audi connect vehicle control
Using Audi connect vehicle control services, you
can perform tasks such as viewing data about
your vehicle or control vehicle functions
Wi-Fi
Applies to: vehicles with Wi-Fi hotspot
Depending on the country and the vehicle equipment,
the following functions may be available:
Wi-Fi
When the function is switched on, the MMI's Wi-Fi hots
SEE MORE:
Brake Caliper, Replacing, Brakes 1KU
Note
In the following description the brake caliper is removed
and replaced without the brake carrier and pads. The brake hose
is removed.
Should the brake pads also be replaced, the parking brake
must be adjusted back, refer to
→ C
Overview - Driver Side Airbag
1 - Locking Bracket
Use a T25 TORX screwdriver, approximately 100 mm long
2 - Steering Column Electronics Control Module -J527-
With Airbag Spiral Spring/Return Spring with Slip Ring -F138- and
Steering Angle Sensor -G85-
Removing a