Audi Q3 Owners & Service Manuals

Audi Q3: Tires with Emergency Running Characteristics, Repairing

Wheel and Tire General Information / Chassis / Audi Q3 (8U) 2011-2018 Service Manual / Tires with Emergency Running Characteristics, Repairing

General Information

  Caution

Examining damaged tires should only be performed by trained personnel.

  WARNING

  • Run-flat tires must be replaced after they have gone flat.
  • Pay close attention to the installation instructions.

- The wheel must be inspected before mounting, as with conventional wheel/tire systems.

- The wheels should be checked for damage after a flat tire (true running, axial run-out, other damage) because the wheel could be damaged in an emergency by driving through a pothole.

- A damaged wheel should be replaced.

  Note

  • Flat tire sprays may be used on tires with emergency running characteristics (SST).
  • Tires must be replaced after running flat.
  • Observe the manufacturer mounting instructions.

Special Tools

Special tools and workshop equipment required

  • Trim Removal Wedge -3409-
  • Wheel Lock Set -T10101-

Audi Q3. W00-0016

  • Wheel Lock Set -T10101A-

Audi Q3. W00-10188

  • Wheel Lock Set -T40004-

Audi Q3. W00-0660

  • Wheel Lock Set -T40073-

Audi Q3. W00-10162

  • Torque Wrench 1332 40-200Nm -VAG1332-

Audi Q3. W00-0428

  • Torque Wrench 1410 -VAG1410-

Audi Q3. W00-0554

  • Hot Air Blower -VAG1416-

Audi Q3. W00-0004

  • Cartridge Gun -VAG1628-
  • Wheel Centering System Adapter -VAS5271-
  • Hunter RFT33VAG Road Force Touch Wheel Balancer -VAS6230B4-
  • Wheel Balancer Clamping Adapter - 5 Lug -VAS6243-
  • Tension Plate -VAS6652-
  • Pressure Bolt -VAS6652/1-

Audi Q3. W00-0536

Revision History

DRUCK NUMBER: A00ARRA0021

Audi Q3. Revision History

READ NEXT:

  Electrical System

  Electrical Equipment

  General, Technical data

Safety Precautions Start/Stop System Safety Precautions When Working on Vehicles with the Start/Stop System, Observe the Following:   WARNING Danger of personal injury because the engine

SEE MORE:

  Check Valve, Checking

Check valve is removed, refer to → Chapter "Check Valve, Removing and Installing".   Note The check valve is installed directly in front of the vacuum pump. Valve must allow air to flow in direction of arrow. Valve must remain closed in opposite direction.  

  Antenna Wires, Repairing

Aerial Cable Repair Set VAS6720 Special tools and workshop equipment required Aerial Cable Repair Set -VAS6720- The Aerial Cable Repair Set -VAS6720- makes it possible to perform a quality repair on antenna wires RG 174 (blue) and RTK 031 (black). The set contains the insulation remova

© 2019-2026 Copyright www.auq3.net | 0.0124