Audi Q3 Owners & Service Manuals

Audi Q3: Overview - Front Three-Point Seat Belt

Body Interior / Body / Audi Q3 (8U) 2011-2018 Service Manual / Overview - Front Three-Point Seat Belt

Overview - Front Three-Point Seat Belt, USA and Canada Market

Audi Q3. Overview - Front Three-Point Seat Belt, USA and Canada Market

1 - Belt End Fitting Cover

  • Removing and installing. Refer to → Chapter "Front Belt End Fitting, Removing and Installing, USA and Canada Market-Specific".

2 - Bolt

  • 45 Nm
  • If it was removed because of an accident, replace the bolt

3 - Seat Belt Guide

  • Must swing into vertical position or carrier direction by itself after tightening screw.

4 - Bolt

  • 45 Nm
  • If it was removed because of an accident, replace the bolt

5 - Bolt

  • 5 Nm
  • Quantity: 2
  • If it was removed because of an accident, replace the bolt

6 - Front Seat Belt Guide

  • Removing and installing. Refer to → Chapter "Front Seat Belt Guide, Removing and Installing".
  • Place the belt into the depression in the front belt guide.
  • Do not jam or damage the belt
  • Install the seat belt guide front alignment pin in the openings on the B-pillar.

7 - Bolt

  • 45 Nm
  • If it was removed because of an accident, replace the bolt

8 - Seat Belt Guide

  • Must swing into vertical position or carrier direction by itself after tightening screw.

9 - Bolt

  • 27 Nm
  • If it was removed because of an accident, replace the bolt

10 - Seat Belt Height Adjuster

  • Removing and installing. Refer to → Chapter "Seat Belt Height Adjuster, Removing and Installing".
  • Always replaced if the belt tensioner has deployed with the belt on

11 - Automatic Belt Retractor

  • Drivers side: with Driver Seat Belt Tensioner Igniter 1 -N153- and Driver Belt Force Limiter -G551-
  • Front passenger side: with Front Passenger Seat Belt Tensioner Igniter 1 -N154- and Front Passenger Belt Force Limiter -G552-
  • Removing and installing. Refer to → Chapter "Front Three-Point Seat Belt, Removing and Installing".

12 - Belt End Fitting

  • Removing and installing. Refer to → Chapter "Front Belt End Fitting, Removing and Installing, USA and Canada Market-Specific".

13 - Nut

  • 45 Nm
  • Replace the bolt if it was removed because of an accident when the seat belt was buckled.

14 - Driver Seat Belt Tensioner Igniter 2 -N297-

  • Passenger side: Front Passenger Seat Belt Tensioner Igniter 2 -N298-
  • Removing and installing. Refer to → Chapter "Front Belt Tensioner, Removing and Installing, USA and Canada Market-Specific".

Overview - Front Three-Point Seat Belt, Not USA and Canada Market-Specific

NOT FOR NORTH AMERICAN MARKET

Audi Q3. Overview - Front Three-Point Seat Belt, Not USA and Canada Market-Specific

1 - Cap

2 - Bolt

  • If it was removed because of an accident, replace the bolt
  • 45 Nm

3 - Front Belt End Fitting

  • Removing and installing. Refer to → Chapter "Front Belt End Fitting, Removing and Installing".

4 - Bolt

  • Quantity: 2
  • If it was removed because of an accident, replace the bolt
  • 5 Nm

5 - Front seat belt guide

  • Removing and installing. Refer to → Chapter "Front Seat Belt Guide, Removing and Installing".
  • Place the belt into the depression in the front belt guide.
  • Do not jam or damage the belt
  • Install the seat belt guide front alignment pin in the openings on the B-pillar.

6 - Bolt

  • If it was removed because of an accident, replace the bolt
  • 45 Nm

7 - Seat Belt Guide

  • Must swing into vertical position or carrier direction by itself after tightening screw.

8 - Bolt

  • If it was removed because of an accident, replace the bolt
  • 27 Nm

9 - Seat Belt Height Adjuster

  • Removing and installing. Refer to → Chapter "Seat Belt Height Adjuster, Removing and Installing".
  • Always replaced if the belt tensioner has deployed with the belt on

10 - Automatic Belt Retractor

  • Driver side: with Driver Seat Belt Tensioner Igniter 1 -N153-
  • Front passenger side: with Front Passenger Seat Belt Tensioner Igniter 1 -N154-
  • Removing and installing. Refer to → Chapter "Front Three-Point Seat Belt, Removing and Installing".

11 - Connector

  • Driver side: for Driver Seat Belt Tensioner Igniter 1 -N153-
  • Front passenger side: for Front Passenger Seat Belt Tensioner Igniter 1 -N154-
  • Disconnecting and connecting. Refer to → Chapter "Front Three-Point Seat Belt, Removing and Installing".

12 - Bolt

  • If it was removed because of an accident, replace the bolt
  • 45 Nm

13 - Stop sleeves

READ NEXT:

  Overview - Rear Outer Three-Point Seat Belt

1 - Belt Guide   Caution Do not rotate bolts under any circumstances when removing and installing belt guide. They are set by the manufacturer. Replace the entire belt gui

  Front Three-Point Seat Belt, Removing and Installing

Front Three-Point Seat Belt, Removing and Installing Removing   WARNING Follow all safety precautions when working with pyrotechnic components. Refer to → Chapter "Pyrotechnic

  Rear Three-Point Seat Belt, Removing and Installing

Outer Rear Three-Point Seat Belt, Removing and Installing Removing - Remove the rear outer belt end fitting. Refer to → Chapter "Rear Outer Belt End Fitting, Removing and Installing".

SEE MORE:

  Memory function

General information With the memory function, you can save and call up seat profiles using the memory buttons in the door trim panel. Depending on vehicle equipment, some settings such as the driver's seat and exterior mirror position can be stored. Storing and recalling a seat profile The memory fu

  Setting the distance

Applies to: vehicles with adaptive cruise assist Fig. 102 Operating lever: setting the distance When approaching a vehicle driving ahead, the adaptive cruise assist brakes to the set speed and then maintains the set distance. If the vehicle driving ahead accelerates, then the adaptive cruise assist

© 2019-2026 Copyright www.auq3.net | 0.0085