Audi Q3: Special Tools
Special tools and workshop equipment
required
- Shock Absorber Set -T10001-

- Tensioning Strap -T10038-
- Tripod Joint Tool -T10065-


- Engine/Gearbox Jack Adapter - Wheel Hub Support -T10149-


- Bearing Installer - Wheel Hub/Bearing Kit - Pressure Head
-T10205/13- from the Bearing Installer - Wheel Hub/Bearing Kit
-T10205A-

- Hydraulic Press - Bushing Assembly Tool Kit -T10230-

- Engine/Gearbox Jack - Gearbox Support -T10337-

- Subframe Bushing Assembly Tool Kit -T10356-

- Socket AF 24 mm -T10361A-

- Assembly Tool, Sub-frame Alignment -T10486A-

- Torque Wrench 1331 5-50Nm -VAG1331-

- Torque Wrench 1332 40-200Nm -VAG1332-


- Spring Compressor Kit - Spring Tensioner -VAG1752/1-

- Spring Compressor Kit - Spring Retainer with Inserts
-VAG1752/3A-
- Spring Compressor Kit - Adapter Blocks -VAG1752/9-

- Digital Torque Wrench -VAG1756A-

- Hydraulic Press -VAS6178-

- Pneumatic/Hydraulic Foot Pump -VAS6179-

- Engine and Gearbox Jack -VAS6931-
- Circlip Pliers -VW161A-


- Press Plate -VW402-
- Press Piece - Rod -VW408A-

- Press Piece - Rod -VW411-
- Press Piece - 37mm -VW416B-
- Press Piece - Multiple Use -VW447H-

- Puller - Grease Cap -VW637/2-

- Camshaft Installer Kit - Sleeve -3241/4- from the Seal
Installer - Camshaft Installer Kit -3241-
- Bearing Installer - Control Arm -3346-
- Bearing Installer - Carrier Bearing -3350-

- Front Subframe Mount Kit -3372-
- Fitting Sleeve -3378-
- Torque Adapter -3390-

READ NEXT:
Overview - Electronic Damping Component Location
Note
The body acceleration sensors may not be interchanged with
each other.
1 - Right Front Body Acceleration Sensor -G342-
Overview - Front Level Control System Sensor
Note
A replacement Left Front Level Control System Sensor -G78- and Right
Front Level Control Sensor -G289- only comes complete with the coupl
SEE MORE:
Description
Applies to: vehicles with distance warning
Fig. 106 Instrument cluster: display of the current distance
Fig. 107 Instrument cluster: distance warning
General information
At speeds above approximately 40 mph (65
km/h), this function measures the distance to
the vehicle ahead as time. If
Backrest Adjustment Hand Wheel, Removing and Installing
Note
Only the hand wheel for the backrest adjustment wheel can be
removed and installed.
Special tools and workshop equipment
required
Assembly Tool -3399-
Removing
- Move the front seat all the way forward/up.
-&n