Audi Q3 Owners & Service Manuals

Audi Q3: Settings

Telephone settings

Applies to: vehicles with telephone

  • Applies to: MMI: Select on the home screen: PHONE > .

The following options may be possible, depending on your mobile device:

  • Decline with text message
  • Edit voicemail number

Switching between two mobile devices

Requirement: phone 1 and phone 2 must be connected to the MMI.

Switch telephones: the device name of the available mobile device is displayed. You can switch the phone by pressing the button.

Ringtone and volume settings

  • Ringtone and message volume: you can adjust the volume using the slider.
  • Ringtone: select a ringtone from the list.
  • Microphone input level: you can adjust the input level of the microphone using the slider.

Data module serial number (IMEI)

Applies to: vehicles with data module

The serial number (IMEI) will be displayed.

Contact settings

Applies to: vehicles with telephone

  • Applies to: MMI: Select on the home screen: PHONE > Contacts > .

Switching between two mobile devices

Requirement: phone 1 and phone 2 must be connected to the MMI.

Switch telephones: the device name of the available mobile device is displayed. You can switch the phone by pressing the button.

The directory for the selected phone will be displayed.

Hide grayed-out contacts

When this function is switched on, contacts that have no phone numbers stored for them will be hidden.

Sort order

You can sort the contacts by Last name or First name.

Download contacts

Requirement: a mobile device must be connected to the MMI.

To update the contacts in the MMI, you can manually download your mobile device contacts. Depending on the mobile device, you may need to disconnect and reconnect the Bluetooth connection to update the contacts.

Importing and exporting contacts

Requirement: a USB storage device is connected to a USB port with charging function.

Contacts in vCard format (.vcf) can be imported or exported from the MMI.

  • Importing contacts from a storage device: Requirement: the USB storage device must contain contacts in the vCard format. They must not be located in sub-folders. Select: > Search for import data > USB device 1/USB device 2 > desired contacts or Select all > Start import.
  • Exporting contacts to a storage medium: Requirement: you must have a contact imported.

    Select: Export contacts > Find exporting source > USB device 1/USB device 2 > desired contacts or Select all > Start export.

Tips

  • The imported contacts are stored in the local MMI memory.
  • There should be no other files or folders on the storage medium containing the contacts to be imported.
  • Contacts that were downloaded from a mobile device cannot be exported.
  • Apple devices and MTP devices (such as smartphones) are not recognized as USB storage devices.

    READ NEXT:

     Messages

    Text messages Applies to: vehicles with telephone Requirement: your mobile device must be connected to the MMI via Bluetooth Message Access Profile (Bluetooth MAP). Applies to: MMI: Select on the ho

     Audi connect

     General information

    Applies to: vehicles with Audi connect Depending on the country and the vehicle equipment, the following functions may be available:  Audi connect Infotainment  Audi connect vehicle contr

    SEE MORE:

     Charging the 12 volt vehicle battery

    Fig. 152 Engine compartment with battery: connections for charger and jump start cable Observe the safety precautions. Requirement: only use chargers with a maximum charging current of 14.8 volts. The battery cables remain connected. The battery is located in the engine compartment. The ground po

     Starting the vehicle

    Convenience key Applies to: vehicles with convenience key Fig. 79 Center console: starting the engine Requirement: the key must be in the vehicle. Starting the engine Press and hold the brake pedal. Press the button. The engine will start. Equipment that uses a lot of electricity is switche

    © 2019-2024 Copyright www.auq3.net