Audi Q3: Satellite map
Applies to: vehicles with navigation system and satellite map
You can display the navigation map with satellite
images.
Requirement: the MMI must be connected to the
Internet.
- Applies to: MMI: Select on the home screen:
NAVIGATION >
> Map settings >
Satellite
map1).
The map view is based on data packets received
from the Internet in the form of satellite images,
which are then combined with the roadways from
the
fig. 131 standard map view.
Tips
- The satellite map1) is updated regularly
whenever the function is opened. The process
may take several seconds.
- Depending on the Internet connection, the
standard map may also be displayed when
the satellite map is switched on1).
1) Audi provides access to services from third party providers.
Permanent availability cannot be guaranteed, because
that depends on the third party provider.
READ NEXT:
Introduction
Applies to: vehicles with navigation system
You can update the map data in the MMI with a
map update. The functions depend on the country
and vehicle equipment.
Map update through onlin
Introduction
Applies to: vehicles with navigation system and online traffic
information
Fig. 135 Traffic information overview
Open traffic information
Requirement: the map must be displayed.
Press
Applies to: vehicles with navigation system
You can adjust the navigation system settings in
the instrument cluster and in the MMI display separately. The settings depend on
the country
and vehicle e
SEE MORE:
Starting to drive, stopping, and parking
Starting from a stop
Press and hold the brake pedal.
Start the engine.
Select a gear.
Release the parking brake.
Release the brake pedal. The vehicle may roll.
Press the accelerator pedal to accelerate.
Securing the vehicle against rolling
Secure your
Removing
Note
The window regulator motor can be removed or installed with
the motor or door window in any position.
- Remove the rear door trim panel. Refer to
→ Body Interior; Rep. Gr.70; Rear Door Trim Panels; Rear Door
Trim Panel, Removing and Installing.
-