Audi Q3: Overview - Seat Pan, Drawer

1 - Retaining Tab

2 - Drawer

3 - Bolt

• 1.5 Nm

4 - Bolt

• 1.5 Nm

5 - Mount

• For the drawer
• Removing and installing. Refer to → Chapter "Drawer Mount, Removing and Installing".

Overview - Seat Pan, Storage Compartment

1 - Front Seat

2 - Seat Side Sill Panel Trim

3 - Spring Nut

• Quantity: 2
• Inserted in the seat pan
• Replace any damaged or deformed threaded clips

4 - Storage Compartment

• Equipment levels
• Removing and installing. Refer to → Chapter "Storage Compartment, Removing and Installing".
• cannot be disassembled, only available as a complete replacement part
• Allocation. Refer to the Parts Catalog.

5 - Bolt

• 1.5 Nm
• Quantity: 2

6 - Upper Seat Frame

Overview - Seat Pan, Seat Depth Adjuster

1 - Nut

• Quantity: 4
• Replace

2 - Sport Seat

• With a seat depth adjuster

3 - Trim

• For seat depth adjustment
• Removing and installing. Refer to → Chapter "Seat Depth Adjuster, Removing and Installing".
• Press on until it engages audibly

4 - Seat Depth Adjuster

• Removing and installing. Refer to → Chapter "Seat Depth Adjuster, Removing and Installing".

5 - Bushing

6 - Bolt

• 4 Nm
• Replace
• Use locking fluid when installing the bolt. Refer to the Parts Catalog for the locking fluid.

7 - Bolts

• 4 Nm
• Replace
• Use locking fluid when installing the bolt. Refer to the Parts Catalog for the locking fluid.

8 - Bolt

• 4 Nm
• Replace
• Use locking fluid when installing the bolt. Refer to the Parts Catalog for the locking fluid.

9 - Bushing

Overview - Seat Pan, Power Front Seat

1 - Bushing

• Inserted in all bearing locations
• Cannot be replaced
• The assembly component must be replaced if the bushing is damaged

2 - Upper Seat Frame

• Removing and installing. Refer to → Chapter "Upper Seat Frame, Removing and Installing, Power Front Seat".
• Allocation. Refer to the Parts Catalog.
• Install all electrical and electronic components and wires in the new upper frame.

3 - Bolt

• 22 Nm
• Quantity: 4
• Self-locking
• Replace
• Threaded holes for bolts must be cleaned, for example, with a thread tap

4 - Seat Pan Lower Frame

• Driver side: with Driver Seat Forward/Back Adjustment Motor -V28-
• Front passenger side: with Front Passenger Seat Forward/Back Adjustment Motor -V31-
• Cannot be disassembled
• Removing and installing. Refer to → Chapter "Seat Pan, Removing and Installing, Power Front Seat".
• To replace the seat belt latch install in the new lower frame

READ NEXT: