Audi Q3: Overview - Battery

Overview - Battery, Engine Compartment Battery Version 1

1 - Battery Tray

• Removing and installing. Refer to → Chapter "Battery Tray, Removing and Installing, Version 1".

2 - Retaining Bracket

• There are different versions. Refer to the Parts Catalog.

3 - Front Battery Trim Panel

4 - Positive Cable

• Disconnecting and connecting. Refer to → Chapter "Battery in Engine Compartment, Removing and Installing, Version 1".

5 - Nut

• 5.4 Nm

6 - Bolt

7 - Heat Protection Sleeve

• There are different versions. Refer to the Parts Catalog.

8 - Battery Cover

9 - Nut

• 5.4 Nm

10 - Ground Cable

• Disconnecting and connecting. Refer to → Chapter "Battery in Engine Compartment, Disconnecting and Connecting".

Vehicles with a start/Stop System

• With Battery Monitoring Control Module -J367-
• Removing and installing. Refer to → Chapter "Ground Cable with Battery Monitoring Control Module -J367-, Removing and Installing, Engine Compartment Battery Version 1".

11 - Bolt

12 - Nut

• 20 Nm

13 - Rear Battery Trim Panel

14 - Battery

• Removing and installing. Refer to → Chapter "Battery in Engine Compartment, Removing and Installing, Version 1".

15 - Bolt

• 22 Nm

16 - Bolt

• 9 Nm

17 - Heat Shield

18 - Lock Washer

Overview - Battery, Engine Compartment Battery Version 2

1 - Front Battery Trim Panel

2 - Bolt

• 3 Nm
• Quantity: 4

3 - Battery

• Removing and installing. Refer to → Chapter "Battery in Engine Compartment, Removing and Installing, Version 2".

4 - Positive Cable

• Disconnecting and connecting. Refer to → Chapter "Battery in Engine Compartment, Removing and Installing, Version 2".

5 - Nut

• 5.4 Nm

6 - Heat Protection Sleeve

7 - Battery Cover

8 - Bolt

9 - Negative Terminal Cover

10 - Nut

• 5.4 Nm

11 - Ground Cable

• With Battery Monitoring Control Module -J367-
• Disconnecting and connecting. Refer to → Chapter "Battery in Engine Compartment, Disconnecting and Connecting".
• Removing and installing. Refer to → Chapter "Ground Cable with Battery Monitoring Control Module -J367-, Removing and Installing, Engine Compartment Battery Version 2".

12 - Bolt

13 - Nut

• 20 Nm

14 - Bolt

• 9 Nm

15 - Battery Tray

• With the rear battery trim panel
• Removing and installing. Refer to → Chapter "Battery Tray, Removing and Installing, Version 2".

16 - Grommet

• For the positive cable from the engine compartment E-box

17 - Bolt

• 9 Nm

18 - Grommet

• For the positive cable to the starter

19 - Bolt

• 9 Nm

20 - Retaining Bracket

21 - Bolt

• 20 Nm

Overview - Battery, Battery in Luggage Compartment

1 - Battery Bracket

• 10 Nm
• With integrated threaded pin

2 - Battery

• Removing and installing. Refer to → Chapter "Battery in Luggage Compartment, Removing and Installing".

3 - Positive Cable

• To engine

4 - Bolt

5 - Nut

• 6 Nm

6 - Main Fuse Box

• In rear right of luggage compartment on battery
• Disconnecting and connecting. Refer to → Chapter "Battery in Luggage Compartment, Disconnecting and Connecting".

7 - Nut

• 20 Nm

8 - Positive Terminal Cover

9 - Battery Heat Shield

10 - Battery Cover

11 - Bolt

• 2 Nm
• Quantity: 7

12 - Negative Terminal Cover

13 - Nut

• 20 Nm

14 - Electrical Wire

• For the Battery Monitoring Control Module -J367-
• Follow the sequence when connecting the ground cable.

15 - Ground Cable

• With Battery Monitoring Control Module -J367-
• Disconnecting and connecting. Refer to → Chapter "Battery in Luggage Compartment, Disconnecting and Connecting".
• Removing and installing. Refer to → Chapter "Ground Cable with Battery Monitoring Control Module - J367-, Removing and Installing, Battery in the Luggage Compartment".

16 - Bolt

17 - Nut

• 6 Nm

18 - Hose for the Central Venting System

19 - Grommet

• For the hose for the central venting system

READ NEXT: