Audi Q3: Glass, Window Regulators
Body / Audi Q3 (8U) 2011-2018 Service Manual / Glass, Window Regulators
READ NEXT:
Repair Information
Minimum Curing Time for Bonded Windows
WARNING
For safety reasons, use only electrically
non-conductive 2C-adhesive when installing windshield
and rear window using the materials li
Windshield
Overview - Windshield
Caution
On vehicles equipped with lane assist, the camera
must be recalibrated if the windshield has been
replaced. Refer to
→ Suspension, Wheels, Steeri
Side Windows
Overview - Rear Side Window
1 - Side Window
Pull or unclip the roof trim molding in the area of the side window
from the clip.
Window glass removing and installing. Refer to
→SEE MORE:
Electromechanical parking brake
Operating the parking brake
The electromechanical parking brake is used to
secure the vehicle from rolling away unintentionally.
The switch is located under the
selector lever
in the center console. It turns on when the parking
brake is set. You can release the parking
brake manually or automatic
Door, Removing and Installing
Removing
- Disconnect the door connector on the A-pillar. Refer to
→ Electrical Equipment; Rep. Gr.97; Connectors.
Note
Secure the A-pillar in the area of the door arrester using
adhesive tape, so that the paint will not be damaged.
- Remove the door arrest
© 2019-2026 Copyright www.auq3.net | 0.0089
