Audi Q3: Do It Yourself
Do It Yourself
READ NEXT:
General information
Park the vehicle as far as possible from moving
traffic in the event of a breakdown. In the event
of a flat tire, park the vehicle on a level surface.
If you are on a steep hill, be especially ca
Changing a tire
Preparation
You must complete the preparation before
changing a tire.
Read and follow the important safety precautions.
Set the parking brake.
Select the "P" position.
When towing a trailer: discSEE MORE:
Driving through water
If you must drive through water, follow these instructions:
Check the stability of the ground, the current,
and the water depth. If the ground is unstable,
there is a strong current, or there are waves,
the water must only reach up to the lower edge
of the body at the most.
Deactivate the Sta
Floor Heat Shield, Removing and Installing
Center Tunnel Heat Shield, Removing and Installing
Removing
- Remove the left and right underbody cover. Refer to
→ Chapter "Underbody Panels, Removing and Installing".
- Remove the driveshaft heat shield. Refer to
→ Chapter "Driveshaft Heat Shield, Removing and Installi
© 2019-2026 Copyright www.auq3.net | 0.0097
