Audi Q3: Destination details
Applies to: vehicles with navigation system
Fig. 130 Details
After you have selected a destination, the details
will be displayed. Route guidance is will not be
active yet.
The functions depend on the vehicle equipment
and the selected destination.
- Map preview: to zoom in on the map preview,
press on the map.
- Route criteria.
- More: additional functions.
- Weather: Requirement: the MMI must be
connected to the Internet.
- Call: Requirement: a mobile device must be
connected to the MMI. You will
make a call to the phone number that is stored
for the destination.
- Start: starts navigation to the displayed destination.
The map will be displayed.
- Parking: press Parking to search for a parking
space at the destination. You can use the
parking space as a destination or stopover.
Details: Requirement: the MMI must be connected
to the Internet.
- Display of distance/driving time to the destination
- Weather at the destination: Requirement:
the MMI must be connected to the Internet.
Selecting a destination from the map
Applies to: vehicles with navigation system
A point on the map can be used as the destination.
Opening the map
- Applies to: MMI: Press NAVIGATION on the
home screen.
- If necessary, press A to display the map.
Adjusting the scale
- Select: > select a scale.
Marking the destination
- Press and hold a point on the map until a marking
appears or the address for the selected destination
is shown.
Selecting map content (such as POIs) as the
destination
Requirement: map content must be displayed.
- Press on map content on the map (for example,
).
Selecting the destination
- Select: > Start.
READ NEXT:
Applies to: vehicles with navigation system
You can enter additional destinations during active
route guidance.
Entering a stopover
Requirement: route guidance must be active.
Enter a destination.
Map function
Applies to: vehicles with navigation system
Fig. 131 Active route quidance
Fig. 132 Marked map object
Opening the map
Applies to: MMI: Press NAVIGATION on the
home screen.
If neces
Applies to: vehicles with navigation system and predictive
route guidance
Your MMI can learn the routes that you drive frequently
(such as your daily commute to work and
back) and suggest route guidan
SEE MORE:
Note
The headrests can be removed with the front seats installed.
Removing
- Move the front seat forward into the lowest position and
tilt backrests approximately 45º.
Note
The release button is located on the outer left of the
driver seat and inner left of the passe
Procedure
The requirements for testing the cooling capacity are
fulfilled. Refer to
→ Chapter "A/C Cooling Output, Testing Requirements".
- Measure the ambient temperature (must be warmer than 15 ºC
(59 ºF) ).
- Close the doors, the engine hood, the windows, the sunr