Audi Q3 Owners & Service Manuals

Audi Q3: Wheel and Tire Guide

Audi Q3, Type 8U

This is the Wheel and Tire Guide for the Following Model:

"Audi Q3 / RS Q3".

Play Close Attention to the corresponding Notes and Cautions As Well As the Comments in the Document.

  Note

Inner diameter 57 mm, hole circle 112 mm, 5 wheel bolts, tightening specification 140 Nm

Audi Q3 Type 8U, MY 2011-2015

2.0L TFSI, 147 kW

  Note

  • These are the tire/wheel combinations that are technically possible for the vehicle.
  • Check if the desired rims or wheel sizes are valid for the affected vehicle.
  • Always read the "General Information" for this. Refer to → Chapter "General Information".

Audi Q3. 2.0L TFSI, 147 kW

1)  Only with additional wheel covers. Refer to the Parts Catalog.

XL = Extra Load, Reinforced

Spare Tire

Audi Q3. Spare Tire

Q3 Rims, Type 8U

  Note

  • These are the tire/wheel combinations that are technically possible for the vehicle.
  • Check if the desired rims sizes are valid for the affected vehicle.
  • Always read the "General Information" for this. Refer to → Chapter "General Information".

Always read the "General Information".

6.5 J x 16 Rim

  Note

  • Refer to the "Parts Catalog" for assistance to order the correct rims.
  • Pay attention when installing Audi original accessories-wheels to the notes in the "Parts Catalog".

Audi Q3. 6.5 J x 16 Rim

Audi Q3. 6.5 J x 16 Rim

Rim - 7.0 J x 17

  Note

  • Refer to the "Parts Catalog" for assistance to order the correct rims.
  • Pay attention when installing Audi original accessories-wheels to the notes in the "Parts Catalog".

Audi Q3. Rim - 7.0 J x 17

Audi Q3. Rim - 7.0 J x 17

Rim - 7.0 J x 18

  Note

Only with additional 18" wheel cover. Refer to "Parts Catalog".

  Note

  • Refer to the "Parts Catalog" for assistance to order the correct rims.
  • Pay attention when installing Audi original accessories-wheels to the notes in the "Parts Catalog".

Audi Q3. Rim - 7.0 J x 18

Audi Q3. Rim - 7.0 J x 18

Rim - 8.5 J x 19

  Note

Only with additional 19" wheel cover. Refer to "Parts Catalog".

  Note

  • Refer to the "Parts Catalog" for assistance to order the correct rims.
  • Pay attention when installing Audi original accessories-wheels to the notes in the "Parts Catalog".

Audi Q3. Rim - 8.5 J x 19

Audi Q3. Rim - 8.5 J x 19

Rim - 8.5 J x 20

  Note

  • Refer to the "Parts Catalog" for assistance to order the correct rims.
  • Pay attention when installing Audi original accessories-wheels to the notes in the "Parts Catalog".

Audi Q3. Rim - 8.5 J x 20

Audi Q3. Rim - 8.5 J x 20

RS Q3 Rims

Audi Q3. RS Q3 Rims

9.0 J x 18 Rim

  Note

  • Refer to the "Parts Catalog" for assistance to order the correct rims.
  • Pay attention when installing Audi original accessories-wheels to the notes in the "Parts Catalog".

Audi Q3. 9.0 J x 18 Rim

Rim - 8.5 J x 19

  Note

  • Refer to the "Parts Catalog" for assistance to order the correct rims.
  • Pay attention when installing Audi original accessories-wheels to the notes in the "Parts Catalog".

Audi Q3. Rim - 8.5 J x 19

Rim - 8.5 J x 20

  Note

  • Refer to the "Parts Catalog" for assistance to order the correct rims.
  • Pay attention when installing Audi original accessories-wheels to the notes in the "Parts Catalog".

Audi Q3. Rim - 8.5 J x 20

Air Pressures

Q3 Air Pressures, Type 8U

2.0L TFSI, 125/ 147/ 155 kW

  Note

  • The tire pressures must adhere to the specifications on the tire pressure label in the vehicle.
  • If there is no tire pressure label in the vehicle, one may be ordered. Refer to Parts Catalog.

Audi Q3. Air Pressures

Revision History

DRUCK NUMBER: A005A006521

Audi Q3. Revision History

READ NEXT:

  Towing Guide

Towing Guide   Note This is a "guide" for Audi models and their towing weights. The proper towing weight of the respective vehicle must always adhere to the corresponding vehicle docum

  Wheel and Tire General Information

  Specifications for Retrofitting Wheel and Tire Combinations (Documents)

Legal Requirements The manufacturer is granted general type approval for the whole vehicle including all parts and for specific retrofitting (general type approval according to 20 StVZO (Motor V

SEE MORE:

  Uniform tire quality grading

Tread wear Traction AAA BC Temperature ABC Quality grades can be found where applicable on the tire side wall between tread shoulder and maximum section width fig. 154. For example: Tread wear 200, Traction AA, Temperature A. All passenger car tires must conform to Federal Safety Requirement

  Driver Assistance Systems Front Camera

Driver Assistance Systems Front Camera, Calibrating Special tools and workshop equipment required Setting Device Basic Set -VAS6430/1- Wheel Alignment Computer Vehicle Diagnostic Tester Calibration is necessary if:   Note Before calibrating the Driver Assistance Systems Front

© 2019-2026 Copyright www.auq3.net | 0.0102