Audi Q3: Sound System
- Overview - Sound System
- Control Module/Digital Sound System Amplifier, Removing and Installing
- Front Midrange Speaker, Removing and Installing
READ NEXT:
Overview - Sound System
The following systems are offered:
8RE - Basic sound system, Radio CAN.
8RX - Basic plus sound system, Radio CAN /MMI
9VD - Audi Sound system.
9VK - Sound system Premium, BOSE Surro
Control Module/Digital Sound System Amplifier, Removing and Installing
The Digital Sound System Control Module -J525- in the right
rear of the luggage compartment under the luggage compartment
floor covering.
Note
If replacing the control module, select th
Front Midrange Speaker, Removing and Installing
Mid Bass Speaker/Front Bass Speaker, Removing and Installing
The Left Front Mid-Bass Speaker -R101-/Right Front Mid-Bass
Speaker - R102-/Left Front Bass Speaker -R21-/Right Front Bass
Speaker -R2
SEE MORE:
Lock Cylinder, Removing and Installing
Create an assisting tool from a wire hook as follows:
- Take a 1.5 mm diameter welding wire and bend the end to form
an eye.
- Then cut the welding wire.
Dimension -a- = approximately
50 mm.
- File the end of the wire hook into a point.
Dimension -b- = 3 mm
Bulkhead
Overview - Bulkhead
1 - Gasket for Plenum Chamber
To remove, pull forward off the body flange.
Mount the seal on the foam piece -arrows-
and then push it onto the flange on the body.
Mount the seal on the opposite side on the foam piece and push it
onto the flange on the bod
© 2019-2025 Copyright www.auq3.net
