Audi Q3: Overview - Window Regulator

1 - Door

2 - Clip

• For the window regulator cable

3 - Lower Double-Bolt

4 - Window Regulator

• Removing and installing. Refer to → Chapter "Window Regulator, Removing and Installing".

5 - Lower Double-Bolt

6 - Door Control Module

• Driver Door Control Module -J386-
• Front Passenger Door Control Module -J387-
• Overview. Refer to → Chapter "Component Location Overview - Central Locking".

7 - Bolt

• 3.5 Nm
• Quantity: 3

8 - Window Regulator Motor

• Driver Window Regulator Motor -V147-
• Front Passenger Window Regulator Motor -V148-
• Removing and installing. Refer to → Chapter "Window Regulator Motor, Removing and Installing".

9 - Nut

• 6 Nm

10 - Cap

11 - Nut

• 6 Nm

12 - Cap

13 - Nut

• 6 Nm

14 - Nut

• 6 Nm

Overview - Window Guides and Window Shaft Strips

1 - Door

2 - Outer Window Shaft Strip

• Removing and installing. Refer to → Chapter "Outer Window Shaft Strip, Removing and Installing".

3 - Inner Window Shaft Strip

• Removing and installing. Refer to → Chapter "Inner Window Shaft Strip, Removing and Installing".

4 - Window Guide

• Removing and installing. Refer to → Chapter "Window Guide, Removing and Installing".

Overview - Door Handle and Door Lock

Overview - Door Handle and Door Lock, Exterior Door Handle and Mounting Bracket

1 - Outside Door Handle Sensor

• Equipment levels
• In the exterior door handle
• Left Front Exterior Door Handle Touch Sensor -G605-, Right Front Exterior Door Handle Touch Sensor -G606-
• Removing and Installing. Refer to → Electrical Equipment; Rep. Gr.94; Overview - Keyless Access Authorization System Exterior Door Handle.

2 - Bolt

• 2.5 Nm

3 - Front Backing

• Removing and installing. Refer to → Chapter "Door Handle, Removing and Installing".

4 - Operating Cable

• For the door lock

  Caution

There is a risk of malfunctions.

The door lock must be removed and installed together with the bracket to prevent over-bending the cable when disengaging and engaging it.

The cable must be disconnected from/attached to lever on the door lock outside of the door.

• Removing and installing. Refer to → Chapter "Door Lock Cable, Removing and Installing".

5 - Bracket

• Removing and installing. Refer to → Chapter "Bracket, Removing and Installing".

6 - Rear Backing

• Removing and installing. Refer to → Chapter "Door Handle, Removing and Installing".

7 - Passenger Side Cap

• Closed version
• Removing and installing. Refer to → Chapter "Lock Cylinder Cap/Housing, Removing and Installing".

8 - Housing

• For the front passenger door
• Removing and installing. Refer to → Chapter "Lock Cylinder, Removing and Installing".

9 - Cap - Driver Side

• For lock cylinder
• Removing and installing. Refer to → Chapter "Lock Cylinder Cap/Housing, Removing and Installing".

10 - Install the Lock Cylinder

• For the driver door
• Removing and installing. Refer to → Chapter "Lock Cylinder, Removing and Installing".

11 - Exterior Door Handle Trim

• Vehicle versions for vehicles without a convince key
• Removing and installing. Refer to → Chapter "Door Handle Trim, Removing and Installing".

12 - Exterior Door Handle

• Removing and installing. Refer to → Chapter "Door Handle, Removing and Installing".

Overview - Door Handle and Door Lock, Door Lock and Catch

1 - Door Inner Cover

• Removing and installing. Refer to → Chapter "Door Inner Cover, Removing and Installing".

2 - Door Opener Cable

• Removing and installing. Refer to → Chapter "Door Opener Cable, Removing and Installing".

3 - Grommet

• Cannot be replaced separately

4 - Door Lock

• Removing and installing. Refer to → Chapter "Door Lock, Removing and Installing".

5 - Bolt

• 19 Nm
• Quantity: 2

6 - Bolt

• 25 Nm
• Quantity: 2

7 - Catch

• Removing and installing. Refer to → Chapter "Catch, Removing and Installing".

8 - Bolt

• 1.5 Nm

9 - Guide

• For lock cylinder
• Removing and installing. Refer to → Chapter "Lock Cylinder Guide, Removing and Installing".

READ NEXT: