Audi Q3 Owners & Service Manuals

Audi Q3: Overview - Steering Column Switch Module

Electrical Equipment / Electrical System / Audi Q3 (8U) 2011-2018 Service Manual / Overview - Steering Column Switch Module

Steering Column Switch Module Assembly Overview, with Mechanical Ignition Switch

Audi Q3. Steering Column Switch Module Assembly Overview, with Mechanical Ignition Switch

1 - Steering Column

2 - Bolt

  • Quantity: 2
  • For steering lock housing (shear bolt)

3 - Lock Cylinder

  • Removing and installing. Refer to → Chapter "Lock Cylinder, Removing and Installing".

4 - Ignition Key

5 - Bolt

  • 1.1 Nm
  • Quantity: 3

6 - Steering Column Electronics Control Module -J527-

  • With Airbag Spiral Spring/Return Spring with Slip Ring -F138-, Steering Angle Sensor -G85-
  • Removing and installing. Refer to → Chapter "Steering Column Electronics Control Module -J527-, Removing and Installing, with Mechanical Ignition Lock".

  Caution

Risk of damaging coil connector.

Coil connector with slip ring is not to be turned following removal.

  • Pin assignment for the Steering Column Electronics Control Module -J527-. Refer to → Chapter "Steering Column Electronics Control Module -J527- Connector Assignment, with Mechanical Ignition Lock".

7 - Transport Protection

8 - Mount

  • With Turn Signal Switch -E2-, Windshield Wiper Intermittent Mode Switch -E22-
  • Vehicle equipment version with cruise control system: with Cruise Control Switch -E45-
  • Removing and installing. Refer to → Chapter "Steering Column Combination Switch, Removing and Installing".

9 - Steering Lock Housing

  • Removing and installing. Refer to → Chapter "Steering Lock Housing, Removing and Installing".

10 - Ignition/Starter Switch -D-

  • Removing and installing. Refer to → Chapter "Ignition/Starter Switch, Removing and Installing".

11 - Ignition Switch Key Lock Solenoid -N376-

  • On vehicles with automatic transmission
  • Removing and installing. Refer to → Chapter "Ignition Switch Key Lock Solenoid -N376-, Removing and Installing".

Overview - Steering Column Switch Module, with Electronic Ignition Switch

Audi Q3. Overview - Steering Column Switch Module, with Electronic Ignition Switch

1 - Steering Column

2 - Bolt

  • Quantity: 2
  • For steering lock housing (shear bolt)

3 - Anti-Theft Immobilizer Reader Coil -D2-

  • Removing and installing. Refer to → Chapter "Anti-Theft Immobilizer Reader Coil, Removing and Installing".

4 - Ignition Key

5 - Access/Start Authorization Button -E408-

  • Overview. Refer to → Chapter "Component Location Overview - Center Console Controls".

6 - Bolt

  • 1.1 Nm
  • Quantity: 3

7 - Steering Column Electronics Control Module -J527-

  • with Airbag Spiral Spring/Return Spring with Slip Ring -F138-, Steering Angle Sensor -G85-
  • Removing and installing. Refer to → Chapter "Steering Column Electronics Control Module -J527-, Removing and Installing, with Electronic Ignition Lock".

  Caution

Risk of damaging coil connector.

Coil connector with slip ring is not to be turned following removal.

  • Pin assignment for the Steering Column Electronics Control Module -J527-. Refer to → Chapter "Steering Column Electronics Control Module -J527- Connector Assignment, with Electronic Ignition Lock".

8 - Transport Protection

9 - Mount

  • With Turn Signal Switch -E2-, Windshield Wiper Intermittent Mode Switch -E22-
  • Vehicle equipment version with cruise control system: with Cruise Control Switch -E45-
  • Removing and installing. Refer to → Chapter "Steering Column Combination Switch, Removing and Installing".

10 - Electronic Steering Column Lock Control Module -J764-

  • Removing and Installing. Refer to → Suspension, Wheels, Steering; Rep. Gr.48; Steering Column; Electronic Steering Column Lock Control ModuleJ764, Removing and Installing

READ NEXT:

  Lock Cylinder, Removing and Installing

Create an assisting tool from a wire hook as follows: - Take a 1.5 mm diameter welding wire and bend the end to form an eye. - Then cut the welding wire. Dimension -a- = approximatel

  Steering Column Switch Module, Removing and Installing

Steering Column Switch Module, Removing and Installing, with Mechanical Ignition Lock Removing - Adjust steering wheel downward and to rear as far as possible, use entire adjustment range o

  Steering Column Electronics Control Module -J527-, Removing and Installing

Steering Column Electronics Control Module -J527-, Removing and Installing, with Mechanical Ignition Lock The Airbag Spiral Spring/Return Spring with Slip Ring -F138- and the Steering Angle Senso

SEE MORE:

  Personalization

General information Applies to : vehicles with personalized user settings Depending on vehicle equipment and your country, your vehicle may be able to manage various users in the MMI. Each user will be assigned the settings that they last used. Before you begin driving, you can select a user in th

  Parking aid plus

Activating and deactivating Applies to: vehicles with parking aid plus Fig. 111 Center console: parking aid button General information The parking aid assists when parking and maneuvering by providing warnings about obstacles. If the ultrasonic sensors on the vehicle fig. 88 detect an obstacle, th

© 2019-2026 Copyright www.auq3.net | 0.0096