Audi Q3: Interior Lights, Switches
Audi Q3 (8U) 2011-2018 Service Manual / Electrical System / Electrical Equipment General Information / Interior Lights, Switches
READ NEXT:
Immobilizer
General Information
The anti-theft immobilizer system control module can
depending on the vehicle be integrated in the following systems:
Instrument Cluster Control Module -J285-
Comfort Syst
Trailer Hitch
Trailer Hitch Socket, Removing and Installing - Version 1
Removing
- Turn off the ignition and remove the key.
- Remove the bolts -arrows-.
- Detach the socket from the retaining pl
SEE MORE:
Lower Rear Lid Trim Panel, Removing and Installing
Lower Rear Lid Trim Panel, Removing and Installing
Special tools and workshop equipment
required
Pry Lever -80-200-
Omega Clip Tool -T40280-
Removing
- If installed, remove the rear shelf. Refer to
→ Chapter "Rear Shelf Rear Section, Removing and Installing".
- Remove
Suspension Strut and Upper Control Arm
Overview - Suspension Strut and Upper Control Arm
1 - Shock Absorber
On vehicles with electronically controlled damping, perform the
function "Adapt the control position" with the Vehicle Diagnostic
Tester.
If the control position was reprogrammed and if the vehicle has lane
© 2019-2026 Copyright www.auq3.net
