Audi Q3: Instrument cluster overview
.png)
Fig. 2 Audi virtual cockpit plus overview
.png)
Fig. 3 Digital instrument cluster or Audi virtual cockpit overview
Depending on the vehicle equipment, the following items may appear in the instrument cluster:
- Display
- Engine coolant temperature
.png)
- Engine coolant temperature
- Left dial
- Tachometer
- Tab area
- Central area
- Status line (one or two lines)
- Right dial
- Convenience display
- Fuel level
.png)
- Right additional display with speedometer
- Left additional display with:
- Selector lever position
- Audi drive select mode
WARNING
If there is a serious system malfunction, the
display may turn off. The
.png)
indicator light
may also turn on. Stop the vehicle safely. See
an authorized Audi dealer or authorized Audi
Service Facility for assistance.
Tips
- The following pages primarily show illustrations of the Audi virtual cockpit plus. The display or location of the items that are shown may vary on the different versions of the instrument cluster.
- You can select the units used for temperature, speed, and other measurements.
- Speeds are displayed in mph (miles per hour) or km/h (kilometers per hour).
Operating
.png)
Fig. 4 Driver information system display
.png)
Fig. 5 Left side of multifunction steering wheel
Information is organized within various tabs 1 in the instrument cluster. The tab contents are displayed in the central area 2.
Requirement: the ignition must be switched on.
Selecting a tab
- Press the
.png)
button 3 repeatedly until the
desired tab is selected.
Returning to functions at higher levels
- Press the
.png)
button 5.
Opening and closing the menu
- Press the
.png)
button 6.
Selecting and confirming a function
Requirement: a menu or list must be displayed.
- To select a function, turn the left thumbwheel 7 to the desired function:
- To confirm a selection, press the left thumbwheel 7.
Switching the view
- Press the VIEW butt 4.
The following tabs may be available, depending on vehicle equipment:
.png)
READ NEXT:
Adjusting the display
Fig. 6 Center display: adjusting the display
Switching the view
Applies to: Audi virtual cockpit
Press the VIEW button to switch between the
default view 1 and the enhanced view 2.
Adjusting the
Tachometer
The tachometer 2 displays the engine
speed in revolutions per minute (RPM). The beginning
of the red zone in the tachometer indicates
the maximum permissible engine speed for
all gears once the engine
Engine oil temperature indicator
Applies to: vehicles with engine oil temperature indicator
Depending on the vehicle equipment, the engine
oil temperature may be indicated by
a bar in
the instrument cluster.
Open the vehicle funcSEE MORE:
Airbag system
General information
WARNING
If you have not fastened your safety belt,
you are in an incorrect seating position, or
you are too close to the airbag system, the
airbag system will not be able to protect
you. This increases the risk of serious or fatal
injuries. Make sure that every vehicle
pa
Correct positioning for children
Always secure children in a child safety seat designed
for the body size, weight, and age of the
child.
You can secure child safety seats in your vehicle
using the lower LATCH anchors or the safety
belts. You can also secure child safety seats to
the top tether anchor. Depending on the child
safety