Audi Q3: Adjusting the display
.png)
Fig. 6 Center display: adjusting the display
Switching the view
Applies to: Audi virtual cockpit
- Press the VIEW button to switch between the default view 1 and the enhanced view 2.
Adjusting the layout
Applies to: Audi virtual cockpit
Depending on the vehicle equipment, various layouts may be available.
- Applies to: MMI: Select on the home screen: SETTINGS > Display & brightness > Audi virtual cockpit.
- To adjust the desired layout, press 3.
Adjusting the additional display
Applies to: Audi virtual cockpit
Depending on the vehicle equipment, the additional displays that can be selected may vary.
- Applies to: MMI: Select on the home screen: SETTINGS > Display & brightness > Audi al cockpit > Configure.
- Select the desired additional display.
Reducing the display
Depending on the vehicle equipment, you can hide the central area in the instrument cluster.
- Select on the instrument cluster: vehicle functions
tab >
.png)
button > Reduced display, or - Press the VIEW button on the multifunction steering wheel.
Coolant temperature display
The coolant temperature display 1 only functions when the ignition is switched on.
To reduce the risk of engine damage, please observe the following notes about the temperature ranges.
Cold range
If only the LEDs at the bottom of the gauge turn on, the engine has not reached operating temperature yet. Avoid high engine speeds, full acceleration, and heavy engine loads.
Normal range
The engine has reached its operating temperature
once the LEDs up to the center of the gauge
turn on. If the
.png)
indicator light in the instrument
cluster display turns on, the coolant temperature
is too high.
Note
- Auxiliary headlights and other accessories in front of the air intake impair the cooling effect of the coolant. This increases the risk of the engine overheating during high outside temperatures and heavy engine load.
- The front spoiler also helps to distribute cooling air correctly while driving. If the spoiler is damaged, the cooling effect will be impaired and the risk of the engine overheating will increase. See an authorized Audi dealer or authorized Audi Service Facility for assistance.
READ NEXT:
Tachometer
The tachometer 2 displays the engine
speed in revolutions per minute (RPM). The beginning
of the red zone in the tachometer indicates
the maximum permissible engine speed for
all gears once the engine
Engine oil temperature indicator
Applies to: vehicles with engine oil temperature indicator
Depending on the vehicle equipment, the engine
oil temperature may be indicated by
a bar in
the instrument cluster.
Open the vehicle funcSEE MORE:
Jump starting
Preparation
You should only perform the steps that follow if
you have the necessary tools and technical expertise.
If the engine does not start because the vehicle
battery is drained, you can jump start your vehicle
using another vehicle. Jump start cables are
needed to do this.
Both vehicle batteri
Battery
Battery General Information
To guarantee a long service life, the Battery -A- must be
checked, serviced and maintained as described in this manual.
The Battery -A- supplies the power to start the engine. The
Battery -A- also acts as a power reserve for the entire vehicle
electrical system.
