Audi Q3: Starting and stopping the engine automatically
Applies to: vehicles with Start/Stop system
The system checks if certain conditions are met before and during the Stop phase, and determines if the engine stops and how long it remains stopped. For example, if power usage is high, the engine will not be stopped. Along with other conditions, the following factors influence the automatic engine start or stop:
- Environmental conditions (slopes, inclines, elevation, temperature)
- Battery (charge status, temperature, power usage)
- Engine temperature
- Assist systems
- Driving behavior
Depending on the engine, the .png)
indicator light
may appear if the engine is not stopped.
Manually switching the Start/Stop system off and on
Applies to: vehicles with Start/Stop system
The .png)
button is located above the
selector lever
in the center console.
- Press
.png)
to switch the system
on or off. The button
will be illuminated when the function is
switched off.
Tips
If you switch the system off during a Stop phase, the engine will start again automatically.
Messages
Applies to: vehicles with Start/Stop system
The following messages may appear depending on the vehicle equipment:
Drive system: please start the vehicle manually
This message appears when specific conditions are not met during a Stop phase. The Start/Stop system will not be able to restart the engine. The engine must be started with the [START ENGINE STOP] button.
Vehicle starting system: malfunction! Please contact Service
There is a malfunction in the Start/Stop system.
Drive the vehicle to an authorized Audi dealer or authorized Service Facility as soon as possible to have the malfunction corrected.
READ NEXT:
Brakes
General information
You can apply the vehicle's brakes using the brake
pedal.
Operating noise
Noises may occur when braking depending on the
speed, braking force, and outside conditions such
as temper
Electromechanical parking brake
Operating the parking brake
The electromechanical parking brake is used to
secure the vehicle from rolling away unintentionally.
The switch is located under the
selector lever
in the center console
Special driving situations
Driving uphill and downhill
When driving uphill, downhill, or at high altitudes,
note the following information:
Drive slowly and carefully.
Do not try to turn around if you cannot safely
drive onSEE MORE:
Audi connect vehicle control services
Services
Applies to: vehicles with Audi connect vehicle control
Using Audi connect vehicle control services, you
can perform tasks such as viewing data about
your vehicle or control vehicle functions remotely.
You can view and use services available for your
vehicle at my.audi.com or through the my
Center Console Rear Trim, Removing and Installing
Special tools and workshop equipment
required
Wedge Set -T10383-
Removing
- Move the front seats all the way forward.
Vehicles with a Center Armrest:
- Vehicles with vents: remove the rear vent. Refer to
→ Chapter "Rear Vents, Removing and Installing".
- Equipment