Audi Q3 Owners & Service Manuals

Audi Q3: Refrigerant Circuit

READ NEXT:

 A/C System Repair Information

Air conditioning systems designed for refrigerant R12 are only to be filled with refrigerant R134a if certain requirements are fulfilled. Refer to → Chapter "Refrigerant Circuit, Conve

 Using Service Station

General Information Vehicles with a high-voltage system (hybrid vehicles) Extremely Dangerous Due to High-Voltage The high-voltage system is under high-voltage. Death or serious bodily injury by

 Refrigerant Circuit, Discharging with Service Station

Work procedure may vary depending on the type of tools selected (the tool-specific operating instructions should therefore be followed). The refrigerant circuit is to be discharged if parts o

SEE MORE:

 Lower Transverse Link, Removing and Installing

Lower Transverse Link, Removing and Installing, FWD Vehicles Special tools and workshop equipment required Torque Wrench 1332 40-200Nm -VAG1332- Removing - Measure dimension from center of wheel to lower edge of wheel housing. Refer to → Chapter "Wheel Bearing in Curb Weig

 Heater Core, Removing and Installing

Special tools and workshop equipment required Hose Clamps - Up To 25mm -3094- Engine Bung Set -VAS6122- Compressed air gun, commercially available   Note Depending on the engine version to support the engine coolant pump an After-Run Coolant Pump -V51-/Heater Support Pump -V

© 2019-2025 Copyright www.auq3.net