Audi Q3: Refrigerant R134a Capacities, Refrigerant Oil and Approved Refrigerant Oils
Approved Refrigerant Oils and Capacities
Note
- As PAG (polyalkylene glycol) oil is highly hygroscopic
(attracts water), opened containers are to be immediately
resealed so as to be air-tight.
- PAG oil from containers which have been open for a lengthy
period is no longer usable.
Refrigerant oil capacities. Refer to
→ Chapter "Refrigerant Oil Capacities".
Refrigerant R134a Capacities
Note
- When charging the high-pressure side of refrigerant
circuits, always use maximum amount of refrigerant (some of the
refrigerant remains in the charging hoses).
- The specified capacities for refrigerant R134a apply if no
other different specifications given for the "S" and "RS".
- Make sure the A/C Service Station is standing at the same
level as the vehicle (maximum difference: 50 cm) when charging
the refrigerant circuit. If a difference in height is large
enough, a difference between the amount of refrigerant displayed
on the service station and amount actually filled in the circuit
will result (depending on the version of the A/C Service
Station). The ability of the A/C Service Station to perform an
exact filling can change.
- For compressor allocation ("Zexel/Valeo", "Sanden" or
"Denso/Nippondenso"). Refer to the Parts Catalog and to
→ Heating, Ventilation and Air Conditioning; Rep. Gr.87; System
Overview - Refrigerant Circuit (vehicle-specific
repair manual).
- Refrigerant circuits converted from R12 to R134a are to be
filled with the quantity indicated in the repair manual "Air
conditioner with refrigerant R12". (This repair manual is only
available in hard copy).
- Beginning from production year 2006, the name of the "Zexel"
A/C compressor was changed from "Zexel" to "Valeo".
Approved Refrigerant Oils. Refer to
→ Chapter "Approved Refrigerant Oils".
READ NEXT:
Testing Equipment, Tools and Materials
General Information
Note
This list outlines the testers, tools and materials required
for expert refrigerant circuit repair work.
For tools and
Fluid Capacity Tables
Maintenance, diagnosis
Audi Q3
Caution
All quantities are approximate. Always refer to the
Repair Manual and/or the Maintenance Procedures for
correct filling i
SEE MORE:
Side Instrument Panel Vent, Removing and Installing
Special tools and workshop equipment
required
Hook Tool -T40207-
Removing
Note
The vent has a hole on inside for attaching the Hook Tool
-T40207-.
- Carefully insert the Hook Tool -T40207- between the slats
and hook i
Brake Rotor, Removing and Installing, Brake 1KU
Removing
- Remove the brake caliper with brake carrier, refer to
→ Chapter "Brake Caliper, Removing and Installing, Brake 1KU".
- Remove bolt -3- and remove the
brake rotor.
Installing
Install in reverse order of removal. Not