Audi Q3 Owners & Service Manuals

Audi Q3: Overview - Interior Rearview Mirror

Body Interior / Body / Audi Q3 (8U) 2011-2018 Service Manual / Overview - Interior Rearview Mirror

Overview - Interior Rearview Mirror, Version 1

Audi Q3. Overview - Interior Rearview Mirror, Version 1

1 - Front Cover

  • For the mirror base
  • Removing and installing. Refer to → Chapter "Interior Rearview Mirror, Removing and Installing".

2 - Clip

  • For the interior rearview mirror
  • There are different versions. Refer to the Parts Catalog for the allocation.
  • Replace after removing the interior rearview mirror

3 - Bolt

  • 1.5 Nm
  • Quantity: 2

4 - Rear Cover

  • For the mirror base
  • For interior rearview mirror with optional equipment

5 - Retaining Plate

  • For the interior rearview mirror
  • Bonded to the windshield

6 - Left Cover

  • For interior rearview mirror with optional equipment
  • Press on until it engages audibly

7 - Right Cover

  • For interior rearview mirror with optional equipment
  • Press on until it engages audibly

8 - Rear Cover

  • For the mirror base
  • For interior rearview mirror without optional equipment
  • Press on until it engages audibly

9 - Interior Rearview Mirror

  • Manual dimming rearview mirror or Automatic Dimming Interior Rearview Mirror -Y7-.
  • There are different versions. Refer to the Parts Catalog for the allocation.
  • Removing and installing. Refer to → Chapter "Interior Rearview Mirror, Removing and Installing".
  • Attach in the installed location while turned to 30º and turn it clockwise all the way
  • Replace the clip after removing

Overview - Interior Rearview Mirror, Version 2

Audi Q3. Overview - Interior Rearview Mirror, Version 2

1 - Front Cover

  • For the mirror base

2 - Interior Rearview Mirror

  • There are different versions. Refer to the Parts Catalog for the allocation.
  • Removing and installing. Refer to → Chapter "Interior Rearview Mirror, Removing and Installing".
  • Attach in the installed location while turned to 20º and turn it clockwise all the way
  • Replace the clip after removing. Refer to → Fig. "Mirror Base Clip".

3 - Retaining Plate

  • For the interior rearview mirror
  • Bonded to the windshield

4 - Retaining Plate

  • Bonded to the windshield

5 - Cover

  • For interior rearview mirror with optional equipment

6 - Rear Cover

  • For the mirror base

Mirror Base Clip

Audi Q3. A68-10647

1 - Screw - 1.5 Nm

2 - Interior rearview mirror clip After removing replace the interior rearview mirror. Allocation. Refer to the Parts Catalog.

3 - Interior Rearview Mirror

4 - Screw - 1.5 Nm

5 - Interior rearview mirror clip After removing replace the interior rearview mirror. Allocation. Refer to the Parts Catalog.

6 - Interior Rearview Mirror

READ NEXT:

  Interior Rearview Mirror, Removing and Installing

Removing - Turn interior rearview mirror at the mirror base -1- counterclockwise -arrow- as far as the stop and remove from the retaining plate. Interior Rearview Mirror without Optional

  Passenger Protection, Airbags, Seat Belts

  Component Location Overview - Seat Belts and Attaching Points

1 - Front Seat Belt Latch Overview. Refer to → Chapter "Overview - Front Seat Belt Latch". 2 - Front Passenger Seat Belt Tensioner Igniter 2 -N298- Only USA a

SEE MORE:

  Overview - Front Brake Caliper

Overview - Front Brake Caliper, Single-Piston Brake 1 - Protective Cap Place on the bleed screw 2 - Bleeder Screw 10 Nm Before installing, lightly coat the thread with Lithium Grease -G 052 150 A2-. 3 - Caps Insert in bushing 4 -&nb

  Component Overview - Run-Flat Tire (PAX)

  Caution It is mandatory for run-flat tires to have a tire pressure monitoring system in the vehicle.   Note Be careful not to scratch off the glued- on wheel trim on these rims. The surface of the wheel trim is very sensitive. The rim will have be replaced if the wheel

© 2019-2026 Copyright www.auq3.net | 0.0116