Audi Q3 Owners & Service Manuals

Audi Q3: Overriding control

Applies to: vehicles with adaptive cruise assist

Driver assistance
Fig. 103 Lever: overriding the control

Requirement: the adaptive cruise assist must be switched on.

Overriding control

You can completely override the control, for example when passing or if you would like to accelerate more quickly.

  • To accelerate manually, pull the lever toward you in the direction of the arrow and hold it there, or press the accelerator pedal.
  • To resume the usual cruise control, release the lever or remove your foot from the accelerator pedal.

When you are in the Driver assistance display, the message Overridden will appear.

WARNING

  • Observe the safety precautions and note the limits of the assist systems, sensors, and cameras.
  • Resting your foot on the accelerator pedal could override the cruise control. Braking interventions and corrective actions by the system may not occur.

Driving in stop-and-go traffic

Applies to: vehicles with adaptive cruise assist

Driver assistance
Fig. 104 Instrument cluster: safe start monitor

Stopping with adaptive cruise assist

The adaptive cruise assist also assists you in stop-and-go traffic. Within the limits of the system, your vehicle may brake and remain at a stop if a vehicle driving ahead stops.

Starting to drive with adaptive cruise assist

As long as the message ready to drive and is displayed, your vehicle will begin driving when the vehicle ahead starts to move.

If your vehicle is stopped for too long, it will no longer drive autonomously for safety reasons, and the message will turn off.

  • To extend ready to drive for a brief time or reactivate it, pull the lever briefly toward you in the direction of the arrow fig. 103.
  • To resume manual control of the vehicle, tap the accelerator pedal.

Safe start monitor

Applies to: vehicles with safe start monitor

The vehicle can still start to drive even if certain obstacles are detected when starting to drive. If the surrounding area detection detects an obstacle, you will be alerted to the danger by the indicator light.

If you are in the Driver assistance display, the display 1 fig. 104 and the message Warning! will also appear. An audio signal will also sound.

Your vehicle will drive more slowly when starting.

This may also occur in some situations when there is no apparent obstacle.

  • Press the brake pedal to slow your vehicle if necessary.

WARNING

  • Observe the safety precautions and note the limits of the assist systems, sensors, and cameras.
  • If the message ready to drive appears, your vehicle will start driving even if there is an obstacle between your vehicle and the vehicle ahead. To reduce the risk of an accident, always make sure there are no obstacles between your vehicle and the vehicle driving ahead.

Tips

For safety reasons, adaptive cruise assist only starts driving actively if:

  • The driver's safety belt is fastened
  • All doors and the hood are closed
  • The vehicle has not been stationary for a long period of time

    READ NEXT:

     Driver intervention request

    Applies to: vehicles with adaptive cruise assist Fig. 105 Instrument cluster: request for driver intervention The request for driver intervention instructs you to resume manual control of the vehicle

     Distance warning

    Description Applies to: vehicles with distance warning Fig. 106 Instrument cluster: display of the current distance Fig. 107 Instrument cluster: distance warning General information At speeds above

     Lane departure warning

    General information Applies to: vehicles with lane departure warning The lane departure warning can detect lane marker lines within the limits of the system. If you are approaching a detected lane mar

    SEE MORE:

     Advanced airbag system

    Fig. 64 Headliner: indicator light to display the status of the front passenger's airbag The Advanced Airbag System in your vehicle has been certified to comply with the requirements of the United States Federal Motor Vehicle Safety Standard (FMVSS) 208, as well as Canada Motor Vehicle Safety Stan

     Select destination

    Applies to: vehicles with navigation system Fig. 129 Menu: select destination Opening a menu Applies to: MMI: Press NAVIGATION on the home screen. If the map is displayed, press fig. 128. The following functions are available: Last destinations Favorites Contacts Received destination

    © 2019-2024 Copyright www.auq3.net