Audi Q3: Display and Control Head
Heating, Ventilation & Air Conditioning / Audi Q3 (8U) 2011-2018 Service Manual / Display and Control Head
READ NEXT:
Overview - Display and Control Head
Overview - Display and Control Head, Manual Climate Control System (Heater
without A/C System)
A/C Control Module -J301- (Heater Control Module -J65-)
Note
The following illustration
Display and Control Head, Removing and Installing
Display and Control Head, Removing and Installing, A/C Control Module
-J301- (Heater Control Module -J65-)
Note
Only for vehicles with a manual climate control system
(heater withoutSEE MORE:
Cover and Cushion, Removing and Installing
Cover and Cushion, Removing and Installing, Bench Seat
Removing
- Remove the rear bench seat. Refer to
→ Chapter "Bench Seat/Single Seat, Removing and Installing".
- Pry up the seat cover clamping strip
-2- with a screwdriver along the seat frame from the
molded part.
-&nb
Wheel Electronics, New Design
Assembly Sequence
- Fold the valve -1- downward
-arrow A toward B-.
- Slide the valve with the wheel electronics attached through
the valve opening in the rim.
- Rotate the union nut -2- three
turns on the valve -1-.
- Tighten the union nut -2- until
the bar breaks w
© 2019-2026 Copyright www.auq3.net | 0.0109
