Audi Q3: A/C Service Station, Connecting
Heating, Ventilation & Air Conditioning / Audi Q3 (8U) 2011-2018 Service Manual / A/C Service Station, Connecting
- General Information
- Service Station, Connecting with No Connection on Low- and High Pressure Side of Refrigerant Circuit
READ NEXT:
General Information
Vehicles with a High Voltage System (Hybrid Vehicles)
Extremely Dangerous Due to High-Voltage
The high-voltage system is under high-voltage. Death or serious
bodily injury by electric shock.
-&nb
Service Station, Connecting with No Connection on Low- and High Pressure
Side of Refrigerant Circuit
General Information
On the following vehicles, no service connection is provided
for the service station on the low-pressure side of the
refrigerant circuit; adapters must be used to connect the SEE MORE:
Rear Lid Seal, Removing and Installing
1 - Rear Lid
2 - Rear Lid Seal
To remove, remove seal from body flange.
When installing, align the seal with the joint
-arrow- with the marking in the center of the vehicle.
Beginning at the seam, press the seal all around onto the body
flange.
3 - Bo
Drive Axle, Removing and Installing, Drive Axle with Bolted CV Joint VL
107
Removing
- Loosen the drive axle threaded connection on the wheel side.
Refer to
→ Chapter "Drive Axle Threaded Connection, Loosening and
Tightening".
- Remove the front wheel. Refer to
→ Chapter "Wheels and Tires".
- Remove the noise insulation -1-.
Refer t
© 2019-2026 Copyright www.auq3.net | 0.013
