Audi Q3: A/C Service Station, Connecting
Heating, Ventilation & Air Conditioning / Audi Q3 (8U) 2011-2018 Service Manual / A/C Service Station, Connecting
- General Information
- Service Station, Connecting with No Connection on Low- and High Pressure Side of Refrigerant Circuit
READ NEXT:
General Information
Vehicles with a High Voltage System (Hybrid Vehicles)
Extremely Dangerous Due to High-Voltage
The high-voltage system is under high-voltage. Death or serious
bodily injury by electric shock.
-&nb
Service Station, Connecting with No Connection on Low- and High Pressure
Side of Refrigerant Circuit
General Information
On the following vehicles, no service connection is provided
for the service station on the low-pressure side of the
refrigerant circuit; adapters must be used to connect the SEE MORE:
Brake Lamp Switch, Removing and Installing
Note
The Brake Lamp Switch -F-/Brake Pedal Switch -F63- is
installed in the brake master cylinder.
Removing
Audi RS Q3:
- Remove the air filter housing, refer to
→ Engine Mechanical, Fuel Injection and Ignition; Rep.
Gr.24; Air Filter; Air Filter Housing, Rem
Glove Compartment Lamp -W6-, Removing and Installing
Removing
- Turn the light switch to position "0".
- Press in the tab -1- using a
flat-head screwdriver and pry out the glove compartment lamp
-2-.
- Disconnect the connector -3-.
Installing
Install in reverse order of removal. Note the following:
- Connect the connectors
© 2019-2026 Copyright www.auq3.net | 0.0115
