Audi Q3: Refrigerant Circuit
Heating, Ventilation & Air Conditioning / Audi Q3 (8U) 2011-2018 Service Manual / Refrigerant Circuit
- A/C System Repair Information
- Using Service Station
- Refrigerant Circuit, Discharging with Service Station
- Refrigerant Circuit, Charging with Service Station
- Refrigerant Circuit, Flushing with Compressed Air and Nitrogen
- Refrigerant Circuit, Cleaning (Flushing), with Refrigerant R134a
- Flushing Circuit Block Diagrams
- Electrically Driven A/C Compressor, Rinsing (Remove Refrigerant Oil)
- Adapter for Assembling Flushing Circuit
- Refrigerant Circuit, Determining Leaks
- Refrigerant Circuit, Tracing Leaks Using Electronic Leak Detector
READ NEXT:
A/C System Repair Information
Air conditioning systems designed for refrigerant R12 are
only to be filled with refrigerant R134a if certain requirements
are fulfilled. Refer to
→ Chapter "Refrigerant Circuit, Conve
Using Service Station
General Information
Vehicles with a high-voltage system (hybrid vehicles)
Extremely Dangerous Due to High-Voltage
The high-voltage system is under high-voltage. Death or serious
bodily injury by
Refrigerant Circuit, Discharging with Service Station
Work procedure may vary depending on the type of tools
selected (the tool-specific operating instructions should
therefore be followed).
The refrigerant circuit is to be discharged if parts oSEE MORE:
Overview - Front Backrest
Overview - Front Backrest, Standard Seat/Sport Seat
1 - Seat Pan
2 - Bolt
33 Nm
Quantity: 2
Self-locking
Replace
Threaded holes for bolts must be cleaned, for example, with a thread
tap
3 - Backrest
Removing and installing. Refer to
→ C
Wheel Bearing Unit, Removing and Installing
Special tools and workshop equipment
required
Torque Wrench 1332 40-200Nm -VAG1332-
Removing
- Loosen the drive axle threaded connection on the wheel side.
Refer to
→ Chapter "Drive Axle Threaded Connection, Loosening and
Tightening".
- If installed, remove the nut
© 2019-2026 Copyright www.auq3.net | 0.0111
