Audi Q3: Privacy notice
You can find information about responsibility for data protection in the MMI.
Applies to: MMI: Select on the home screen: SETTINGS > General > Legal notes > About Audi connect.
Image recording
Surrounding area monitoring
Applies to: vehicles with surrounding area monitoring
Some vehicle functions require the vehicle's path to be detected and evaluated. This is done by cameras installed permanently on the vehicle that detect objects in the vehicle's surroundings (such as obstacles or guard rails). The live images from the cameras are transmitted to the applicable control module.
The camera images are transferred to the responsible control module for processing and may be stored, depending on vehicle equipment. The control module analyzes the current camera image using image evaluation software. This image evaluation software detects anonymized technical measurements, such as distances to objects.
The control module evaluates these technical measurements and makes it possible for the assist systems to control the vehicle as needed.
READ NEXT:
Data memories
Vehicle control modules
Fig. 175 Driver's side footwell: connection port for the On
Board Diagnostic System (BD)
Your vehicle is equipped with electronic control
modules fou various vehicle systems s
Transmitted information
Data collection
Applies to: vehicles with data collection
Depending on the country, Audi may collect data
for the following purposes, for example: offer
and product optimization, public safety, provis
Technical data
Identification data
Vehicle data label
Fig. 176 Vehicle identification label
The vehicle identification label
fig. 176 is located
in the luggage compartment under the cargo
floor cover.
The stickeSEE MORE:
Seat Height Adjuster, Removing and Installing
Seat Height Adjuster, Removing and Installing
Removing
Caution
Move the front seat to the highest possible
position. This reduces the spring force when removing
and installing the seat height adjuster.
Seat Height Adjustment Handle:
- Pull seat height adjustment handle -1-
Overview - Wheel Bearing
1 - Suspension Strut
2 - Bolt
70 Nm + 90º
Always replace if removed
Bolt point must face in direction of travel.
3 - Front Speed Sensor
Removing and installing. Refer to
→ Brake System; Rep. Gr.45; Sensors; Front ABS Wheel Speed Sen